Random Updates on Saturday Afternoon

I’ve been posting a lot of reviews on this blog. While I admit they can be helpful to people, it was not something I ever intended to do with this blog. The intention was to keep more towards the daily life-existential-philosophical implications and aspects of skateboarding. It seems I have drifted somewhat from that. I suppose that is as much an existential reality as any.

In any event, here are some random updates from life in mid November 2021.

(1)    My friend Joe got shoot (photos) of Tony Hawk, Bucky, Staab, Rene, and other big hitters in Texas last night. That is so awesome. Here is a pic he took of Hawk and Staab.

 

(2)    Staab has always been off in his own world. I am glad to see that has not changed with time. That is an inspiration as much as his skating is.

(3)    I am out on injury, again. Happens a lot these days (hi, old age). This time it’s a pulled muscle in my lower back. I did it on November 9th. I landed an (early grab) b/s air on a mini ramp, and when I landed, my back was like, “Ok. You’re done.” A similar thing happened (other side) when landing an Indy nosepick off a bench earlier this year. It appears that a “hard” landing, while bent over, is something that causes this. I wasn’t really warmed up on either of these two days. Now that it happened a second time, I’m starting to learn/see the patterns. The take away is to, (a) make sure I am really warmed up before going too hard, (b) stretch more in daily life, and (c) maybe add some strength training? It’s starting to feel a bit better. I hope top be back on the board in another week or so.

(4)    I’ve been on this weird trip recently—I need to write more about this, actually—at first I thought it was a nostalgia thing (maybe it is??), but now I seem to be viewing more as an experiment in personal archeology. What does that mean? I means I am toying around with what I experience in the present when I do, visit, and rehash some of the things I did when I was much younger. I am not trying to relive anything from the past. Rather, I am curious about the present, and what happens when the experience of time and place fold back onto each other, if that makes any sense. Again, I need to write more about this.

(5)    My 1980s Instagram account now has almost 18K followers. That is insane. I never thought more than 50 people would be interested that feed. Much of what I was talking about in (4) above has been triggered by some photos from that feed. Again, I need to write more about it elsewhere.

(6)    Fall is here. My favorite time of year to skate. It’s been really warm so far (well, climate change and all that), so it hasn’t really felt like a typical “cool” fall. Winter will be here soon enough, so I shouldn’t complain.
 

The Big Four: Ace vs. Indy vs. Thunder vs. Venture

 I recently revisited the four major trucks brands. 

 

Ace. 

Indy.

Thunder.

Venture.

Below is a ultra stripped-down product review/comparison of each. But don't take my opinion as dogma. Try them and find out what works best for you.

Ace 44 AF1 (8.25")

 

"Squirrel Tanks." These are heavier than standard Indys. I could not get passed this. I constantly noticed it. The stock bushing are mush. Combine that with Ace's shorter wheelbase, and these things ride like "squirrel tanks." Due to non-standard sizing of Ace bushing, there is no easy swap-out for aftermarket bushings.* Some fawn over how Ace trucks looks. I am not one of them. I think they look like something you'd get on a Wal-Mart board. Oh, the sound. How could I forget that? Something about these trucks (the pre-oiled pivot cups??) made my board sound like it was just pulled out of a swamp--a horrific water-logged, deaden, thud. I can't deal with that. Oh, they are really expensive, too. And I'm not even going to touch on the fiasco with with their sizing catastrophe. Different is one thing. Dumb is another. Lot of the latter going on over there. All this said, Ace trucks do turn really well, and have a nice surfy feeling. I can see why people like them. I, however, am not one of them. I should also note that since they have the shortest wheelbase of the group, they have the "worst" pinch (e.g. krooked grinds).

 

Heavy.

Squirrel turn.

Ugly.

Sound like Swamp Monster.

Over-priced.

A lesser pinch.

 

*Ace now makes a "hard" aftermarket bushing if you want your trucks a bit tigher....but they still ride quite loose. 

 

Thunder 148 Team Hollows (8.25")

I didn't totally hate these. Wait. Yes, I did (but not as much as Ace). They are tad lower than my Indys, and have almost the exact same wheelbase. The turn, however, is very different. It's a much stiffer turn (at first), but then goes kind of quick at the end, and then snaps back to level. Even with softer bushing my trucks felt "tight." I found myself doing lots of tick-tacks. No fun. I tried a few different bushings types and hardnesses in these. Nothing felt really good. They had a decent grind. The slightly lower truck height made my pop feel a little more...flat. These might be better suited for a deck with steep kicks, but I am not about to switch out trucks based on the deck I am riding. The real deal-breaker on these is the baseplate issue. Even if you were to assume that I could make these turn/pop like my Indys, I'll never get passed the Thunder baseplate problem. Yeah, you can nose/tail slide on Thunders. That said, there is less room for margin of error and/or you need a lot more wax, and it becomes a lot more like a power slide (e.g. wheels rubbing) than a nose/tail slide. Hard pass for me. Thunders, however, have some of the best pinch on the market.

 

Souless turn.

Wonky pop.

Absurd baseplate.

Killer pinch. 

 

Venture Hollows 5.6 (8.25")

 

The lightest of the bunch (but only by a tad). Oddly, I liked these more than Thunders, despite Ventures also having the longest (by far) wheelbase of the group. I put stock 90a Indy bushing in these, and they felt...meh. Certainly not a super-quick turn, but a turn that felt decent. Venture are notorious for a stiff "turn." Weird grind. Metal seems harder than any of the others. Ace, Thunder, and Indy all have a round metal encasing around the axle. Venture does not. Theirs is more of a "straight wall" of hanger. I feel like the rounded axle encasing of the others helps with grinds, whereas the "wall" of Ventures has a tendency to catch more (esp. on chunky ledges/curbs). Best kingpin clearance of the bunch for Feeble/Smith grinds. I also think these trucks look a little...weird, almost 1960s SciFi-ish (which is normally a great look). And again, weird baseplate issues. There are two problems with Venture baseplates. First, is the outermost hardware mounting holes are so far under the hanger (or the hanger is so far out over the baseplate) that it makes its really difficult to get a skate tool on the mounting hardware bolts. This is just absurd. Second, is the exact opposite problem of Thunders; Venture baseplates stick quite far out*--more so than any other truck on the market. Thus, the extended baseplate gives you a smaller effective nose/tail (e.g. less space to balance on). I mean, we are talking small amounts here, but it's enough that (a) I can notice it, and (b) it occupies space/causes mental doubt in my head about nose/tail slides. Last, Ventures with their long wheelbase also have great pinch.

 

Weird grinds.

Meh turn.

Meh-er looks.

Baseplate calamities.

Good pinch.

 

*NOTE: The forged Venture baseplates are the ones that stick out kind of far. The cast/regular baseplates are about the same size as Ace/Indy (e.g. normal). Also, the forged plate Ventures have a longer wheel base (.25" longer) than the cast plate Ventures. There is also a height difference between the two. I think forged was around 52mm and cast was around 54/55mm. 

 

Indy Titanium (or any forged Indy) 144 (8.25")

 

I saved the best for last. No baseplate issues. Not too heavy, not too light (these are actually a few grams lighter than the Thunder Team Hollows). Smooth consistent turn (with lots of aftermarket bushings to get exact turn feel you want--super loose, to super tight). Mid-sized wheelbase. Mid-sized height. Every truck listed above has some kind of "problem" with it (weight, turn, grind, baseplate, appearance, etc.). Indy has none of those, at least for me. Everything else always gets compared to Indys, for a reason. A friend said it best, "If you are trying to get your trucks to ride like Indys, then just ride Indys." Pinch is better than Ace, but not as good as Thunder/Venture.

 

Note: Forged Indys are 53.5mm tall. Standard Indys are 55mm tall. Standards are too tall for me, and get a little ghost-pop at times. The forged ones are a great mid-level height, on par with most other trucks. The mid-Indys (mIndys) are 52mm tall, but those things have a host of other problems I'm not getting into here.        

 

 

   

Ankle Update, Feb 2021

This below clip is a little outtake from last night's session. The angle iron was a tad sticky. Didn’t go fast enough/lean back far enough to compensate. Front end dipped down. I stepped-off onto the bad ankle...and down I go.

Almost two years after the initial broken bone, after two surgeries, after almost a year back on the board, and after significant recovery, my front ankle STILL betrays me on occasions...and sometimes even on very simple/low impact things such as this little 5-0 grind. I never know when it’s going to happen. 

Fortunately, this doesn’t occur nearly as often as before, and when it does, my ankle doesn’t hurt nearly as bad. Things like this used to be a session-ender. Now I just get up and keep going. That’s awesome. The pads continue to be a real life-saver when it does happen, because I usually go down straight to my knee (sound on to hear the plastic scrape). I don’t foresee loosing those anytime in the near future—it’s just not a game of Russian roulette I want to play with my kneecaps, because eventually I will loose in a serious way. It's just not worth it. 

 

The other major improvement is that I can now control my falls much better than before—I don’t go down nearly as hard. That’s also great news. So, despite occasional floundering, my ankle doing pretty good. 

Keep pushing...I certainly am. 

Diminish, Fade, and Wither: The Inspiring Delcline of Tony Hawk

I am an old, broken, skateboarder. My balance is not what it once was. I don’t react as fast as I used to. I don’t heal as quickly as before. Every year skateboarding becomes harder. Every year I become more susceptible to injury. I like my pads a hell of a lot more than I used to. These are hard facts of biology, time, age, and life.

Recently Tony Hawk posted about his recent struggles doing a 720. A trick he invented long ago. He said he could not spin them as fast anymore. He said previous attempts ended badly and did not inspire confidence. He said they were much harder now. He battled it for awhile, pulled one, and said he may never do it again. Albeit vastly different scales, these battles are ones many of us already know quite well. I certainly do. They are also battles EVERY skateboarder WILL know, provided they stick with it long enough. There is no escape.

It’s not often someone in skateboarding, especially someone at Hawk’s level, openly talks about (and shows) the impact of aging. It’s almost unimaginable to hear TONY HAWK talk about battles with CONFIDENCE. Hearing and seeing his own battles with declining skill and ability certainly make our own battles with the same that much more universal and...humanizing.

Much respect for making that 720, Tony. But even more respect for the honest vulnerability. Every session is a gift. It won’t last forever...and even Tony Hawk knows that.

We diminish. We fade. We wither. And that, at least to me, is a gift. The impermanence of it all is what makes it so special. It’s what makes it so hard to take anything for granted, and what reveals how profound the simple really is (and I’m not talking about just skateboarding here). As I knowingly roll into my own twilight, I do so with a gratitude brighter than a thousand Suns.

Hawk, battling to land a 720, one last time.

Well, My Arm Isn't Broken...(2021 is off and running)

Well, 2021 is off to an interesting start. On Jan 4th I badly hyper extended my elbow. I gave it a few days to see how it was doing, but started to think it might be broken???? However, I had to hold off on going to the doctors. Why? Well, I got Covid. Fortunately it was not a very bad case. That said, almost three weeks after the first Covid symptoms appeared, I still have ZERO taste or smell.

Once out of quarantine I was able to see the doctor about my elbow. X-Ray showed no break. That is good, but almost a month later it still hurts in some situations. The Dr. said to come back in 2-3 weeks if it’s still causing some problems. I have a feeling it will be.

Just as I was again feeling almost 100% post-Covid (aside from no taste/smell), and ready to do some mellow skating again (with an elbow pad on bad arm), the weather took a turn for the worst. We are in the middle of a bad cold snap right now. It is currently 10 degrees outside. Wind-chill is well below zero. The cold is supposed to end in two days, to be immediately followed by a large snowstorm. By the time I am back on the board it will be over a month since I last skated (and will probably still have the elbow injury when I start rolling again). That sucks.

Big Wheels Might be a Big Problem (or Don't Let the Past Ruin Your Present)

Often people who cling to sentimental notions of the past do not realize how much their set-up is actually holding them back (especially when deck/truck/wheel ratios are WAY off). This is not only true for those wrapped up in nostalgia, but those who may not be aware about the so-called "proper" ratios of a modern skateboard. I say it all the time, but equipment evolved FOR A REASON. Below is a post someone made on Facebook after they had serious equipment epiphany. I am not, by any means, saying there is a "correct" way to set-up your skateboard. There simply isn't. That said, there are consequences to the way your board is configured. Some may not be fully aware of those consequences. Thus, I am ONLY trying to share information, which may make for happier skateboarding. 

__________________

“Since returning to skating after several years off, I have been focused on getting back
everything I used to be able to do, within reason (which was not much to begin with). I then hit a plateau, and stopped progressing. Most of it was admittedly out of fear of getting hurt, but the rest was centered around never feeling stable and balanced on my board. I always felt like I was going to tip over and fall off. I couldn't get my wheels over the coping to grind because I felt like I was going to fall off. I couldn't roll-in because I always felt like I was going to fall off. I couldn't ollie because I would actually fall off every time I bent my knees.

It was miserable. I went skating every day this week. Each time, instead of feeling better afterwards like skating always does to me, I felt increasingly depressed. When I got home from the park yesterday, I was pretty much disgusted with myself. I made a sandwich, cracked open a beer, put on some sweats, and sat in my recliner, moping over the fact that I am a washed-up has-been, and generally being whiney. I was blaming it on my weight, my age, my joints, etc.

Then as I was watching a show on TV, something was mentioned about fulcrums, levers, and pivot points, and, my brain exploded...my board is too tall.

I am constantly analyzing, engineering, and tweaking things to make them work better in pretty much all aspects of my life. In skating, I am always trying new equipment and changing combinations, to find that optimum configuration.* A lot of times it is just me doing retail therapy to compensate for sucking, but sometimes I find something useful.

I love innovation, but sometimes I get stuck in the Old Man mindset where I have false assumptions that everything from “my time” was better. I realized that while I have a modern board, my configuration was completely stuck in the 1980s; my wheels, trucks, and boards...all huge.

There was a logic behind it: Tall wheels go faster and are easier to get over coping, sidewalk cracks, rocks, and other obstacles. Wider wheels have more surface area. Wider trucks and boards offer a more stable platform and turn easier. But there is a tradeoff. All of that big tall Monster Truck mentality has side effects. Besides the instability just rolling, I was having muscle injuries in my pushing leg, because I couldn't get that foot to make solid contact with the ground. I was hitting every push with the toes, and that was causing a chain reaction strain from my Achilles to my thigh.

So, today I went to my local skate shop, and bought a new set of wheels; the smallest wheels I have ever owned. I drove to the skate park, broke out the tools, and stripped my board down. I took my riser pads off, and switched my wheels from 60mm to 54mm.

I hopped on my board to take a test run, and it was literally night and day. I instantly felt completely stable and in complete control of my board. Instead of constantly feeling like I was falling off, I felt like it was glued to my feet. I was instantly going 2x faster, doing ollies, grinding, and generally just playing catch-up for the last two months.

The Lesson: I was completely stuck buying top of the line stuff, but always top of the line Retro Reissue stuff. I kept subconsciously equating anything “smaller wheels” with the early 90s "bearing cover" wheels. I knew there was a difference those and modern “small” wheels (e.g. under 60mm), but I just couldn't get it through my head that I can still skate AND use modern equipment, let alone that I would actually be able to skate better. So, don't let yourself get stuck in a rut because you have "always done it this way." You might only be diminishing your own ability.”

*Be careful falling too far down this rabbit hole. Yes, an 8.75” deck with Indy 159s and 56mm wheels is going to ride VERY different than an 8.0” deck with titanium Thunder 147s and 50mm wheels. Getting into extremely minor equipment tweaks (e.g. 52mm vs. 53mm tall trucks) will often lead you to an OCD-induced madness without any real substantive performance benefits.